Menu

Chemical Process Design

Our team has over 20 years experience with chemical process design for manufacturing plants. With our offsite fabrication ship, OSHA exposure hours and interruption to existing process lines is minimized. EPIC’s process experts help you increase production and improve safety with practical solutions that meet your budget and get completed on-time.

Non-linear increases in surface area to mass, reaction kinetics, fluid dynamics and other key process parameters are addressed during our front-end engineering and design stages. Civil upgrades, plant tie-ins and OSHA exposure are carefully planned. From the design stage through commissioning EPIC delivers a fully tested,chemical plant that meets your specifications, budget and timeline.

Project Photos:

Capabilities for the Chemical Industry:

From design to field construction management, we are a full service process system engineer, procure, construct company with a focus in process applications. We most often provide turnkey design/build services, where we take a chemical application and we design, fabricate the system, install the process and start it up for you. However, every client is different and our services may be bundled according to your needs. Specifically we have expertise in:

  • Process Engineering
  • Engineering Studies
  • Scale Up Capabilities
  • Process Simulation
  • General Automation
  • Process Programming
  • Electrical Design
  • Physical System Design
  • Equipment & Instrumentation Selection
  • Fabrication & Assembly
  • Quality Assurance Program
  • Field Construction Services

Visit our capabilities section to learn more about the specific services we provide under each of the categories above.

Types of systems we build include:

We build a variety of custom process systems to meet your needs. Typical types of systems are listed below, but we work with many process technologies to build pilot plants, demonstration plants and full sized commercial plants.

  • Distillation columns
  • Solvent Recovery Systems
  • Absorption systems
  • Continuous mixing systems
  • Batch mixing and blending systems
  • Batch reactor systems
  • Process Intensification Systems
  • Utlity and raw material handling systems
  • CIP systems
  • Pipe bridges

Contact an engineer to discuss your particular needs or to get a quote.

Chemical Process Systems: Select Case Studies

Automated Batch Reactor System Increases Production and SafetyA polymer producing batch reactor module is pictured in EPIC's fabrication shop

In the process of moving an older batch reactor system, the client decided to upgrade the system due to aging equipment and safety concerns. EPIC created a new semi-automated batching system that produces various sizes batches of polymers and was contained in a single skid to fit into a small space at the new facility. The system included manual, vacuum assisted powder additions and automated mixing, batch reacting, and manual storage in 55 gallon drums. Upgrades to the equipment and modern automation increased both production and safety for the client. More..

 

Key Features: Semi-automated batch reactor system, vacuum assist powder additions, manual bulk storage

Two Phase Batch Reaction-to-Distillation Chemical Pilot Plant

Pilot Plant for New Biochemical ProductsArgo Genesis partnered with EPIC to demonstrate a new asphalt additive making process at a pilot plant scale. EPIC worked with lab data provided by Argo to design and fabricate a two-phase batch-reaction-to-distillation process skid. The process also included a steam injection system and solvent recovery. The new plant produces the biopolymer in 32 working hours, significantly speeding up the testing and development process. The flexible chemical process system also allows the customer to test new formulas and provide viability for commercial products. More..

Key Features: Two phase batch reaction-to-distillation system, scale-up of new technology to working demonstration pilot plant, agitation and pumping systems, highly viscous product, solvent recovery and recycling

Testimonials

“Our collaborative partnership with EPIC enabled us  to deliver a strategically-important project on budget and within a very aggressive timeline. Installation and start-up were completed in a matter of weeks and products made in the EPIC-supplied equipment fully met expectations upon first production.”

– William P., Project Engineer | a global manufacturer of specialty chemical company

“As a plant we have relied on EPIC Systems to be our main resource for process design and to be a project manager on some of the bigger projects.  We like using EPIC since they are very cost effective for the value you get.  When we have dealt with some of the larger Engineering firms, they tend to involve too many disciplines that are not necessarily required.”  With EPIC, we get the Engineer who can handle the job, and we deal directly with him (her). 

We have always had more than qualified Engineers from EPIC that could handle the work.  And over the years we have developed close working relationships with several of their people.  I don’t think you can go wrong with choosing EPIC.” 

– Engineering and Operations Manager | VVF, Illinois Services Company

Case StudyView Modular Process Case Studies...

Find case studies about different project applications EPIC has completed and specific unit operations within each project.

BlogClick here to view our blog...

Our blog features topics on industry, engineering tips and company updates.

Press ReleaseView our latest press releases...

Stay up-to-date on what is happening at EPIC. You will find press releases on modular process systems being delivered to clients, awards won by EPIC and new employees hired.

Free Newsletter

Stay up-to-date on current industry news and trends by subscribing to our modular process newsletter. Our newsletters are sent out semi-annually and cover interesting news, trends, industry topics as well as updates on EPIC Systems.

EPIC Modular Process Systems
4134 Meramec Bottom Rd
St. Louis, MO 63129, US
(314) 845-0077