Skip to main content
Menu

Fractional Distillation

Fractional distillation is the process of separating a substance into its parts (or fractions), taking advantage of different vapor pressure properties of those substances. Fractional distillation is often used as a synonym with “distillation” because distillation always takes advantage of a difference in boiling points of component substances for separation.

fractional distillation columnThe basic steps to distillation are:

  1. Add heat to a liquid mixture with two or more main substances; for example, a water and ethanol mixture.
  2. As the liquid heats, components with the lower boiling points will begin to vaporize and rise through the column. In the water/ethanol example, ethanol will boil off first (BP 78° C, compared to water (BP 100° C). However, the vapor rising will still contain some molecules of the other substances. Vapor gets purer the higher it rises in the column, as heavier molecules “fall off” and turn back to liquid.
  3. As vapor rises in the distillation column, heavier molecules will condense back into liquid and “rain” back down. At any given point in a fractionating column, vapor will be rising, liquid will be falling, and molecules will be mixing. Columns naturally have certain “stages”; a stage is an area in the column with a similar amount of molecules of each type of substance (i.e. a general certain percentage of water and ethanol). Columns are designed to be tall enough to achieve a certain percentage separation, by finding the minimum number of required stages.
  4. Vapor reaching the top of the column (distillate) is collected into an industrial condenser (a big chiller), which cools the vapor back into a liquid, and piped to tank or storage.
  5. Substances remaining in the column continue the process of distillation, until the desired purity is reached. Some columns are a continuous process (most common), where new base solution is added continually. Others are batch systems, where the base is removed when a desired separation is achieved. In many systems, solution is recirculated several times to make sure substances are properly separated.

What is described above is the basic process of distillation. A distillation column is sometimes referred to as a fractional distillation column in industry. Columns that only separate two substances can be called fractionating columns. A fractional distillation system usually achieves several different products at multiple points within the column. As substances rise, mixtures can be pulled at various stages, and condensed.

fractional distillation systemAn easy example to think about is the distillation of crude oil, as explained by How Stuff Works. As crude oil rises in a column, heavy oils are pulled out lower in the column. Diesel and gasoline rise higher and is pulled out further up the column. Each of these substances is from the same “base solution” but contain different percentages of components found in that substance.

Do you need an industrial distillation system? Contact | 314-714-1580 for one of our distillation experts, or find out more about distillation column design today.

Related Links:

, , ,

5 Responses to Fractional Distillation

  1. Geet July 14, 2019 at 11:56 pm #

    Its very helpful… thanku for clear description

  2. Alaquainc October 10, 2019 at 12:56 am #

    Geat knowledge about Distillation Equipment

  3. Sandra October 28, 2019 at 6:22 am #

    You made it very simple and clear. Thanks

  4. FASIHA AZEEM February 3, 2020 at 11:57 am #

    Nice AND LOVELY

  5. Siddhant Somani February 9, 2020 at 7:21 am #

    This is great. it provided all the basic knowledge needed before proceeding to deep learning. Thank you. It helped a lot.

Leave a Reply

EPIC Modular Process Systems
4134 Meramec Bottom Rd
St. Louis, MO 63129, US
314-714-1580